Labor And The Collective Bargaining Process - 978 Words

1.1 The actors who are generally involved in the collective bargaining process are Management but more specifically, the owners and shareholders, executives and managers and the industrial and human resource people. In the collective bargaining process in labor it is the individual employees and the labor unions which represent them. In local, state, and federal government agencies and the public. It is the government agencies that act as representatives of the public interest and are responsible for making policies. 2.1 Some basic assumptions about labor and conflict are society has an impact on labor activities, that conflict is gong to happen between labor and management. This conflict is not always unhealthy though. Another assumption is that conflict comes from labor and management having different social and economic interests. There are multiple perspectives from labor and management. 3.2 Some of the legal reaction toward unionization before the NLRA were that unions were viewed as criminal conspiracies up until 1842. Unions were viewed as violating a worker s right to bargain with their employer as they wish and was not until Commonwealth vs Hunt that unions were not considered as criminal conspiracies. By 1935 Injunctions became used widely and unions were no longer considered criminal conspiracies. If union activities were found illegal, Judges began putting injunctions against these activities and was the judge s determination if a union s actionShow MoreRelatedProcess For Settling Labor Management Disputes Peacefully1668 Words   |  7 Pagescentury the process for settling labor-management disputes peacefully is known as collective bargaining, and was given statutory legitimacy in 1935 with the adoption of the National Labor Relations Act (NLRA) (Boniface Rashmi, 2013, Barrett, Cutcher-Gershenfeld, Kochan, Ferguson, 2007, Cutcher-Gershenfeld Kochan, 20 04, Cutcher-Gershenfeld McKersie, 2009, Post, 2009). The NLRA gave legal authority for employees to organize and join a union for the purposes of collectively bargaining with theirRead MoreLabor Relations: Collective Bargaining Agreements1588 Words   |  7 PagesCollective Bargaining Collective bargaining is the process which involves negotiation on the employment’s terms between the employer and employees. The employment terms possibly include the items like working conditions, employment conditions and workplace rules, overtime pay, base pay, work hours, work holidays, shift length, vacation time, sick leave, health care benefits and retirement benefits. In US, the collective bargaining is done among the leaders of labor union and the company’s managementRead MoreCollective Bargaining And Bargaining Agreements1704 Words   |  7 Pagesterm â€Å"collective bargaining† and list and describe four issues that are mandatory components of a collective bargaining agreement. The term collective bargaining is defined as the system of bargaining when representatives of the employer and the employees negotiate the terms and conditions of employment that will apply to the employees. In the United States collective bargaining agreements are legally binding and typically last one to five years. (Budd, 2013,) PAGE 235 Collective bargaining is oneRead MoreWhy Should We Care About Collective Bargaining? Essay1272 Words   |  6 PagesA question that has frequently been ask over the years is, Why should we care about collective bargaining? . The thing that has been missing from the collective bargaining discussion is a real explanation and understanding of the concept. Collective bargaining has been described as a process when employees and their representatives form a united front, known as a union, to negotiate with their employers. These negotiations are usually over things like pay rates and salary amounts, benefits, andRead MoreArbitration And Sports Association And Dispute Resolution Under The American Arbitration Association1099 Words   |  5 Pagesof their discrete dispute. In summation, arbitration is process that is private, speedy, cost efficient, and customized to the liking of the parties involved. Alternative dispute resolution is by no means a recently adopted form of dispute resolution. Courts now yield a vast number alternative dispute resolution alternatives, with even some courts requiring that cases be taken to mediation before the court will allow the litigation process to begin. In many facets of industry, alternative disputeRead MoreCollective Bargaining, Reviewing The Process And The Issues That Commonly Present Themselves1196 Words   |  5 PagesCollective Bargaining, Reviewing the Process and the Issues that Commonly Present Themselves Lucila Munoz* I. Introduction Throughout the years organizations and unions have struggled for rights and benefits for workers. All the while the managers, supervisors and directors have counteracted such behaviors, favoring the companies, to protect them from going out of business. Through collective bargaining both parties have labored to find common ground. Collective bargaining as defined by the CornellRead MoreUnion Unions And Collective Bargaining Agreements772 Words   |  4 PagesA labor union is a group containing workers who come together and organize an organization to champion their interests in the labor market. The union so formed negotiates for better working conditions, increased job security, safer working conditions, better remuneration and compensation perks (Carver, 2011). In this regard, negotiations play a very important role in coming up with collective bargaining agreements, thus a negotiation process to articulate the interests of employees as representedRead MoreLabor Relations And C ollective Bargaining1111 Words   |  5 PagesLabor Relations Collective Bargaining It is stated that the objective of Labor Relations is derived from the employment relationship. With any relationship, there must be a balance. Without balance the relationship will be hindered. To maintain this balance of an employment relationship we focus on the objectives of Labor Relations. These include efficiency, equity and voice. Efficiency is the productive use of resources, equity involves the fair treatment of employees and voice helps integrateRead MoreHow Collective Bargaining Agreements Effect The Players And The Owners1416 Words   |  6 PagesUnited States have in common? If you guessed Collective Bargaining Agreements (CBA), Unions, arbitration and strikes/work stoppages you are absolutely correct. In the coming paragraphs, labor relations within the world of sports will be discussed from their unions to how collective bargaining agreements effect both the players and the owners. What is a Collective Bargaining Agreement? CBA is a written and signed document between a company and a labor organization specifying the terms and conditionsRead MoreEffectiveness Of Joint Collaboration Between Unions And Management1414 Words   |  6 Pagesrelationship between labor and management was very confrontational when he assumed the role of city manager. His experiences with collective bargaining were in very traditional bargaining environments and he had very little experience with interest-based bargaining. This case traces the impact on service, costs, and capacity for problem solving, by demonstrating the conduct of collective bargaining, non-bargaining interactions, and contract administration with the city s three bargaining units. This paper

The, My Eyes Have Seen By Alice Dunbar Nelson Essay

The important theme of resistance towards the institutions of slavery in America is a major factor that contributed to the formation of the United States. Ever since slaves arrived in the Chesapeake in the early seventeenth century, slaves resisted their enslavement just as anyone else would, in order to claim some measure of freedom against an institution that defined people as property. African Americans resisted slavery in many different forms in order to secure customary rights that dictated work routines, the speed of work, rations distributed, and other basic liberties granted to white Americans. Such forms of resistance included everything from armed rebellion and violence to the use of passive thinking, which involved very subtle rebellious engagement. Some strategies that involved passive engagement when resisting the institution of slavery are seen in the article Sounds of Slavery and the one-act play by Alice Dunbar-Nelson’s, â€Å"My Eyes Have Seen†. M ore aggressive and violent forms of resistances towards slavery are present in the fictional film Django Unchained, directed by Quentin Tarantino, and in the book Benito Cereno. Slaves were interested in developing humane values rather than to continue the theme of domination in order to prevent their masters from having complete control over them. They used sounds of voice and music, providing services and opportunities for the benefit of others and African-Americans fought for their basic freedoms and human

Romanticism Versus Realism free essay sample

Romanticism, an artistic movement, flourished in America with its unique artistic style, use of creativity and imagination, and idealization of the setting or characters. Equally as popular, realism described life objectively and without idealization. These two movements were demonstrated in various works of literature. Edgar Allen Poes The Pit and the Pendulum is a work of romanticism as opposed to Ambrose Bierces An Occurrence at Owl Creek Bridge which is a work of realism. Poes The Pit and the Pendulum is a short story focused on the dark atmosphere of a prisoner aptured by the Spanish Inquisition. In the beginning of the story, Poe sets the mood with foreboding sentences, allowing the reader to feel the hopelessness and despair of the protagonist: l was sick†sick unto death with that long agony felt my senses leaving me. The sentence†the dread sentence of death†was the last of distinct accentuation which reached my ears (292). We will write a custom essay sample on Romanticism Versus Realism or any similar topic specifically for you Do Not WasteYour Time HIRE WRITER Only 13.90 / page The language illustrated in the first few sentences The setting in Poes story is overstated with its gothic-like dungeon. After hat, the sound of the inquisitorial voices seemed merged in one dreamy indeterminate hum I saw the lips of the black-robed Judges. They appeared to me white†whiter than the sheet upon which I trace these words†and thin even to grotesqueness In this excerpt, Poe tell of the mans condemnation at the hand of these Judges. Through his description, Poe is able to illustrate the horror of the situation through the description of the Judges. The black they wear and their pale complexion can represent death. As the narrator awakens in the dark, disgusting prison, the mystery of the story is illustrated. The vibration of the pendulum was at right angles to my length. I saw that the screscent was designed to cross the region of my heart. It would fray the serge of my robe†it would return and reapeat its operation†again†and again Down†steadily down it crept Down†certainly, relentlessly down Down†still unceasingly†still inevitably down! l slid from the embrace of the bandage and beyond the reach of the scimitar. For the moment, as least, I was free. At this point in the story, the suspense is at its peak. The protagonist is about to meet his imminent death, Similar to other romantic works of literature, the story often ends with happily ever after. Poes story is no exception. As the story reaches its final paragraphs, the protagonist is at the brink of his death when a hand catches him: l felt that I tottered upon the brink†I averted my eyes An outstretched arm caught my own as I fell. , fainting into the abyss. It was that of General Lassale. The French army had entered Toledo. The Inquisition was in the hands of its enemies (304). He is saved. An Occurrence at Owl Creek Bridge can be easily identified as a work of realism. Rather than an idealized character, Peyton Fraguhar resembles an average person, a common characteristic of realism. Bierce also A man stood upon a railroad bridge in northern Alabama A rope closely encircled his neck Some loose boards laid upon the sleepers supporting the metals of the railway supplied a footing for him and his executioners Immediately, Bierce begins to establish the setting in the beginning of the story as realistic. As opposed to Poes dark, gothic-like setting, Bierces context is relatively normal. Peyton Farquhar was dead; his body, with a broken neck, swung gently from side to side beneat n the timbers ot the Owl Creek bridge . The basic ideas ot romanticism are exemplified in Poes short story, The Pit and the Pendelum. Likewise, the basic ideas of realism are exemplified in Bierces An Occurrence at Owl Creek Bridge.

Kant and Nietzsche on Morality an Example by

Kant and Nietzsche on Morality by Expert Prof Nelly | 05 Dec 2016 Two modern day thinkers have deeply influenced major world leaders that helped shaped our history. These thinkers are Immanuel Kant and Friedrich Nietzsche. We will assess the thoughts of these two, identify their similarities, and finally, discern their differences. This is to help us gain insights on how certain world leaders viewed morality and made major decisions and actions based on the thoughts of these two thinkers. Need essay sample on "Kant and Nietzsche on Morality" topic? We will write a custom essay sample specifically for you Proceed In Groundwork for the Metaphysic of Morals, Kant evaluates morality from a metaphysical plane. This is analysis that considers many views to explain what should happen in one central idea (3, 4). Kant also expounds that an empirical plane is a study of what have happened (1) while intelligent common sense usually jumbles what happened with what should have (2). Kant prefers metaphysics as a method of analysis for the simple reason that a philosopher specializes in a carefully mastered area of knowledge (2). On the other hand, the ideas of empiricists are prone to corruption because these may fail to explain other things. Meanwhile, those with intelligent common sense are jack-of-all-trades (2). College Students Usually Tell EssayLab specialists: Who wants to write assignment for me? Specialists propose: Essay Writing Help Company Get Paid To Write Essays For Students Website That Writes Your Essay Custom Essay Writing Service Reviews For example, a manufacturer of bio-chemical weapons sets up a factory in a small town. Let us call this town, SmallVille. Of course, the residents of SmallVille will have different opinions on the benefits and disadvantages of the plant. Likewise, SmallVille will have different stakeholders, each with their own point of view. How will Kant evaluate the morality of setting up this facility? Kant will start with one point of view, say, from a farmer who has no idea that people will use bio-chemicals as weapons of mass destruction. Furthermore, the era is in the 1750s. We have no televisions or national newspapers. Moreover, only a few highly-specialized scientists know that bio-chemicals are now useful as weapons. Under these conditions, the farmer will naturally conclude that the factory is good if he derives a direct benefit from it. Like say, the plant manager offers to buy tons of the farmer's cow dung for the breeding of Anthrax. Let us assume that only one person, the in-house scientist, knows what Anthrax will do to an entire population. Next, Kant will evaluate the point of view of the plant manager. The plant manager's circumstance, in this case, is unstable. He used to live in New York City. His stockbroker wife is about to divorce him because he accepted the job and she has been left out all alone in New York pursuing her career. He greatly loves his wife. Moreover, he is not used to the inconveniences of rural life. Yet, he chooses to take the job. His reasons are: a) the factory creates new jobs that the U.S. economy needs; and b) the U.S. President personally told him that the factory will help in the country's war effort with Spain. Finally, Kant will evaluate the point of view of the in-house scientist. The scientist's situation is that: a) He is now working on his dream job; b) The company president charged him with quality control in the production of Anthrax and the design of various delivery systems for the virus; and c) He is fully aware that his work will make the U.S. a superpower. In this case, the scientist thinks that he has made a good moral decision and is working diligently in perfecting the most efficient weapon of mass destruction. Working on the three points of view, Kant will prescribe that the good that we do is essentially valuable based on our motivations or will (7). When we do a certain action and accidentally benefit from it as in the case of the farmer, we are not exactly moral because we have done something good that would benefit ourselves or our family (8). When we do our duty, even though we don't like doing it, we are morally good (8). In the theoretical scenario we have presented, the case of the plant manager is the ideal. In the case of the scientist, Kant will say that the scientist is amorally evil. This is simply because he is doing something that basically fulfills his desires yet is fully aware of the negative implications of what he is doing (8). Thus, Kant prescribes that it is our moral duty to do something that will be good to certain groups of people, even though we don't like doing such duties (9). Kant suggests standards for the evaluation of our moral duties. These standards are: a) We must consider several theoretical perspectives (4); b) We must consider the benefits and costs of certain theoretical decisions that we must make (7); and c) We must consider our motivations before acting on a particular decision (9). In the First Essay On the Genealogy of Morals, A Polemical Tract, Nietzsche evaluates morality based on the origin of words, or etymology, with support from historical events and biblical references (Section 4). This is analysis that considers how certain words evolved to describe the concepts of good and evil. Nietzsche supports this analysis with historical facts (Sec. 5) and certain references from the bible (Sec. 7). Nietzsche's method is revolutionary in the sense that while empiricists only study what has happened, Nietzsche studies the evolution of the human language to explain what is happening. He suggests that certain concepts or word meanings change at different time periods (Sec. 7). For example, the present day moral concepts of good, evil, guilt and punishment took a 360 degree turn at a certain point in human history. Nietzsche asserts that what was thought to be good in ancient times is now perceived as evil. He supports this assertion by analyzing the meaning of the word good which means noble. Nietzsche then evaluates the meaning of the word noble and ascribes its meaning to the concept of the nobility, aristocracy or ruling class. From here, based on some examples from Roman history, Nietzsche asserts that good at a certain point in human history denotes strength, action and the will to accomplish things or succeed (Sec. 6., Sec. 10). Through time and because of the rapid proliferation of Christianity, the word good presently denotes weakness' through the biblical concepts of loving your enemies and Jewish resentment or guilt against its neighboring conquerors, inaction' by leaving things to fate or God and pity' for failure to accomplish noble things or failure to take revenge by leaving punishment of the evil man, or the noble class, to God (Sec. 13). Nietzsche suggests a re-evaluation of our morals precisely because of this 360 degree turn in our concepts of morality. Kant's and Nietzsche's thoughts on morality are similar in the sense that both have realized the limitations of studying concepts on morality solely on the basis of things that have happenedhistorical facts. The same historical facts can both positively and/or negatively support a concept. For instance, what is thought to be good in ancient Rome will now be presently considered evil. By supplying a Nietzschean explanation to a Kantian argument on the proneness to error of empirical conclusions, we find a strong similarity in the line of thinking of these two great thinkers. Another similarity is the desire of both thinkers to find explanations beyond the surface of established thinking or norms. Kant and Nietzsche have been brave enough to present arguments that presented ideas and answered problems differently. In fact, the two gave mankind two methods of highly sophisticated critical thinking that are now often taken for granted in the Internet Age. Many will be surprised that what is often thought to be the superiority of empirical research over other methods of research that are academically acceptable has already been challenged by both Kant and Nietzsche. Both thinkers are revolutionary. Kant gave us the foundations for Cost-Benefit Analysis,' the concept of the moral imperative,' and a clearer exposition on the concept of political will' while Nietzsche gave us the concept of the political correctness' of words and a sophisticated awareness that language, like humans, adapt and evolve. In his Prologue, Nietzsche literally disagreed with Kant in how Kant places a low value on the morality of pity (Sec. 5). For Kant, pity has a low value if it just serves as a means in doing a moral duty. It achieves a higher value when the same moral duty is done with self-sacrifice (8). For Nietzsche on the other hand, pity is a desirable quality of the noble for it connotes the strength of being good. Another disagreement or difference is on the concept of self-sacrifice. Kant places a high value on self-sacrifice. Kant based his ideal on the concept of moral duty around this. Without self-sacrifice, Kant's principle on the evaluation of morality does not hold water (8). Meanwhile, Nietzsche suggests in his First Essay that Jesus Christ's ultimate self-sacrifice by being nailed on the cross strengthened the present day concepts of good and evil. Self-sacrifice became a tool of the weak, resentful Jewish against the strong rulers and conquerors surrounding Israel or Judea who made Jewish life miserable in Biblical times. Christ's self-sacrifice serves as a turning point in the drastic change in what is formerly known to be good and evil (Sec. 15). This way Nietzsche positioned Kant's concept of self-sacrifice as an invention of the weak, common people which ultimately displaced the ancient Roman concept of what is good based on nobility, strength and the drive to succeed. Finally, both thinkers differ in the method they use to analyze and evaluate morality. Kant uses metaphysics while Nietzsche uses genealogy through the careful mix of etymology, historical analysis and biblical references. Kant's method essentially involves theoretical thinking to balance a variety of perspectives. Meanwhile, Nietzsche's method appears to be an empirical variant which creatively uses the origin of words to explain the present day concept of morality. Kant would basically describe Nietzsche's method as that of intelligent common sense where theoretical and practical concepts are primitively jumbled. However, Nietzsche method is far from being primitive in the sense that he provides a revolutionary variation by offering an alternative form of analysis by assessing the evolution of words against history. Nietzsche method only becomes primitive in the sense that some biblical references that he uses to support his ideas are the simple opinions and musings of persons that cannot be considered events in fact. Looking back in history circa World War II, we will find how two major world leaders made their decisions based on the methods and thinking of Kant and Nietzsche. Imagine President Harry Truman as he weighs his options before deciding on authorizing the development of the atomic bomb and practically dropping it in Hiroshima and Nagasaki. Truman would have theoretically weighed the costs and benefits of his decision for a bomb that has never been made or dropped in earlier history. That would have been a hard decision that Truman did not like to make but has to be made because it was Truman's moral duty to do so. Moreover, recent films on similar scenarios have already been made and authors like Tom Clancy have created stories leveraging on Kant's method of metaphysics yet we would have not imagined that such story lines were based on the thoughts and ideas of Kant. Imagine Adolph Hitler's moral judgments as he decides on annihilating the Jews, thinking that it was his moral duty to do so to cleanse the world of this weak race. We would have thought that this idea is repulsive and morally evil but scheming beyond the surface, we would have seen an alternate point of view that seems to be reasonable, yet disturbing. Imagine the word kill and its politically correct' 21st Century equivalent, neutralize. Better yet, imagine the sentence She provides excellent leadership, and its plain translation to: She gives good head. This example suggests some naughty sexual connotation but in world diplomacy, a failure to understand Kant's or Nietzsche's concepts on morality, metaphysics and/or genealogy would not simply turn into trivial jokes but would likely result in world changing events, like war yet hopefully, we would always want to shape this world through peace. Works Cited Kant, Immanuel. Groundwork for the Metaphysic of Morals. Trans. Jonathan Bennet. July 2005. Nietzsche, Friedrich. On the Genealogy of Morals, A Polemical Tract. Ian Johnston. British Columbia: Malaspina University-College. 21 December 2001.

3 Lessons Freelancers Learn from... Bears

3 Lessons Freelancers Learn from... Bears Things that are great about being a bear: You get a diet rich in fish, you’re big enough that most predators don’t bother you, you don’t have to have a LinkedIn Profile, and when you want to go sleep in cave for weeks at a time, nobody thinks it’s weird. Fortunately we’re not just doomed to a life as sad hairless bear-wannabes. There are things freelancers can learn from bears when it comes to managing our work-life, as assembled by Chris over at Rags to Reasonable.Lesson 1: Hibernation ModeUnless you’ve landed a really plum long-term contract or three, odds are your workstream ebbs and flows (or sometimes even dries up entirely). This means you have to know how to match your variable expenses to your variable income- make sure you know how to get your operating costs low and manageable enough to allow even your â€Å"hibernation wages† to last you until your next big paycheck.Lesson 2: Go Where the Food IsThis lesson is both obvious a nd frustrating when you’re starting out and taking every single job that comes your way. Some of them may not be as lucrative as you wanted or as relevant to your overall goals as you hoped. Still,  you take them and accept what the market has to offer since you don’t know if there will be food (i.e. work) if you hold out for something closer to your experience.Lesson 3: Filling Your Fat StoresA positive and negative of freelancing is that when it rains it pours, if you’re paid by the project and not hourly. This means you may work for a while in obscurity and then (sometimes months later!) are  rewarded with a significant check for a large portion of your work.The most valuable tip I took away from Chris’ bear-advice was to remember that check is  not disposable income; it’s not leftover, it’s not actually a reliable, regular paycheck. Make it last as long as possible by being savvy with your spending and strategic with your saving.If You’re Freelancing, Have a Plan For Your â€Å"Hibernation† SeasonIf You’re Freelancing, Have a Plan For Your â€Å"Hibernation† Season  Read More at Rags to Reasonable

Ching vs. Salinas Case Digest Essays

Ching vs. Salinas Case Digest Essays Ching vs. Salinas Case Digest Essay Ching vs. Salinas Case Digest Essay CASE TITLE: Jessie Ching v. William Salinas, Sr. , William Salinas, Jr. , Josephine Salinas, Jennifer Salinas, Alonto Solaiman Salle, John Eric Salinas, Noel Yabut (Board of Directors and Officers of WILAWARE PROUDCT CORPORATION) PETITIONER’S CLAIMS: Petitioner’s insisted that his works are covered by Sections 172.1 and 172.2 of the Intellectual Property Code and that the copyright certificates issued by the National Library are prima facie evidence of its validity, citing the ruling of the United States Court of Appeals in one of its cases. He claims that the IPC provides in no uncertain terms that copyright protection automatically attaches to a work by the sole fact of its creation, irrespective of its mode or form of expression, as well as of its content, quality or purpose. As such, the petitioner insists, notwithstanding the classification of the works as either literary and/or artistic, the said law, likewise, encompasses works which may have a bearing on the utility aspect to which the petitioner’s utility designs were classified. Moreover, according to the petitioner, what the Copyright Law protects is the author’s intellectual creation, regardless of whether it is one with utilitarian functions or incorporated in a useful article produced on n industrial scale. The petitioner also maintains that the law does not provide that the intended use or use in industry of an article eligible for patent bars or invalidates its registration under the Law on Copyright. The test of protection for the aesthetic is not beauty and utility, but art for the copyright ad invention of original and ornamental design for design patents. In like manner, the fact that his utility designs or models for articles of manufacture have been expressed in the field of automotive parts, or based on something already in the public domain does not automatically remove them from the protection of the Law on Copyright. RESPONDENT’S CLAIMS: The respondents aver that the work of the petitioner is essentially a technical solution to the problem of wear and tear in automobiles. Such work, the respondents assert, is the subject of coyright under Section 172.1 of IPC. The respondents posit that a technical solution in any field of human activity which is novel may be the subject of a patent, and not of a copyright. They insist that the certificates issued by the National Library are only certifications that, at a point in time, a certain work was deposited in the said office. Furthermore, the registration of copyrights does not provide for automatic protection. The respondents aver that no copyright is said to exist if a party categorically questions its existence and legality citing Section 218. (b) of IPC. The respondents maintain that a copyright exists only when the work is covered by the protection of IPC. ISSUE: Whether or not the item sbject of the petition is considered work or art and thu s within the scope of the Copyright law protected by the Intellectual Property Code. RULING: Section 171. 10 provides that a â€Å"work of applied art† is an artistic creation with utilitarian functions or incorporated in a useful article whether made by hand or produced on an industrial scale. But as gleaned from the specifications appended to the application for a copyright certificate filed by the petitioner, the said Leaf Spring Eye Bushing for Automobile is merely a utility model. Likewise, the Vehicle Bearing Cushion is illustrated as a bearing cushion. Plainly, these are not literary or artistic works. They are not intellectual creations in the literary and artistic domain, or works of applied art. They are certainly not ornamental designs or one having decorative quality or value. The focus of copyright is the usefulness of the artistic design, and not its marketability. Works for applied art include all original pictorials, graphics and sculptural works that are intended to be or have been embodied in useful article regardless of factors such as mass production, commercial exploitation, and the potential availability of design patent protection. While works of applied art, original intellectual, literary and artistic works are copyrightable, useful articles and works of industrial design are not. A useful article may be copyrightable only if and only to the extent that such design incorporates pictorial, graphic or sculptural features that can be identified separately from, and are capable of existing independently of the utilitarian aspects of the article. There is no copyright protection for works of applied art or industrial design which have aesthetic or artistic features that cannot be identified separately from the utilitarian aspects of the article. Functional components of useful articles, no matter how artistically designed, have generally been denied copyright protection unless they are separable from the useful articles. In this case, the petitioner’s models are not works of applied art, nor artistic works. They are utility models useful articles, albeit with no artistic design or value. A utility model is a technical solution to a problem in any field of human activity which is new ad industrially applicable. It may be, or may relate to, a product, or process or an improvement of any of the aforesaid. Essentially, a utility model refers to an invention in the mechanical field. A utility model varies from an invention which is available on at least three aspects: first, the requisite of â€Å" inventive step† in a patent for invention is not required; second, the maximum term of protection is only seven years compared to a patent which is twenty years, both reckoned from the date of the application; and third, the provisions on utility model dispense with its substantive examination and prefer for a less complicated system. The Leaf Spring Eye Bushing and Vehicle Bearing Cushion are not copyrightable, being not of the same kind and nature as the works enumerated in Section 172 of IPC. In Kho v. Court of Appeals and Pearl Dean (Phil), Inc. v. Shoemart, Inc, the Court ruled that â€Å"these copyright and patent rights are completely distinct and separate from one another, and the protection afforded by one cannot be used interchangeable to cover items or works that exclusively pertain to others. †

Rationalism and empiricism Essay Example | Topics and Well Written Essays - 750 words

Rationalism and empiricism - Essay Example On the contrary, justification involves development of knowledge through acquaintance. Epistemology compartmentalize synthesis and evolution of knowledge into five groups namely; empiricism, rationalism, idealism, constructivism and historical (Lawhead 23). Conventionally, there is a substantial conflict between empiricism and rationalism. In this essay, succeeding sections will discuss in detail about fundamental concepts of both empiricism and rationalism. Prior to dissecting the two knowledge generation models of empiricism and rationalism, it is appropriate to acknowledge the two concepts of priori and posteriori knowledge. Basically, the Latin term ‘priori’ means before while ‘posteriori’ means after. Therefore, priori knowledge refers to any type of knowledge synthesized without relation to observations or experience. Knowledge derived from logical inferences, for example 2 + 2 = 4, is priori in form. This means that any subsequent observation or experience cannot alter the outcome of knowledge. On the contrary, posteriori knowledge is synthesized only after consideration to relevant observations or experiences. Nowadays, posteriori knowledge is popularly referred to as empirical knowledge (Lawhead 42). Proponents of posteriori knowledge assert that no knowledge can be developed prior to consideration of underlying observation or experience. Therefore, priori knowledge is arrived at through reasoning, whi le posteriori knowledge is synthesized from facts generated from empirical activities. At this juncture, it becomes evident that rationalism conforms to principles of priori knowledge. On the contrary, empiricism has close synchronization with the principles of posteriori knowledge. Technically, rationalism involves development of knowledge through innate intelligence and deductive reasoning. Pythagoras, who features as the father of rationalism, asserts that every man has an inherent ability to reason.

The Importance of Communication Personal Statement - 1

The Importance of Communication - Personal Statement Example Since the research work was done as a group, there were challenges that were encountered in terms of different factors affecting the way the group was expected to perform and deliver the identified outcome. In every group endeavor, there were initial challenges in terms of aligning each member’s time, skills and abilities, and efforts toward the fulfillment of the group’s goal. In this particular situation, the goal was to come up with a comprehensive case study which focused on miscommunication during a funds transfer transaction within a bank setting. To do this, it was crucial to initially identify the competencies and capabilities of each member, as well as skills and talents. This is necessary to be able to assign roles and responsibilities and to equitably delegate tasks. Thus, during the process of group formation, members were able to agree on a group leader who governed all the tasks, roles, performance, and coordinating among members to ensure that various pha ses of the case studies are complied with effectively according to a definite time frame. Thus, at this particular phase alone, the challenges encountered were as follows: (1) carefully assessing skills, talents, abilities, and roles that each member would assume; (2) deciding who the group leader would be; (3) agreeing on the delegated tasks and responsibilities; (3) coming up with an outline of scheduled tasks to be delivered by each member depending on a time frame; (4) agreeing to meet or correspond on a particular schedule and venue; and (5) exchanging relevant personal details (names, addresses, contact numbers, and available schedules).

Article analysis Assignment Example | Topics and Well Written Essays - 1250 words

Article analysis - Assignment Example In both scenarios, the business success for both companies and suppliers will depend on the depth and strength of their relationship. This paper starts with an explanation of the common mistakes companies commit in dealing with their suppliers. Several factors that companies should consider before getting a supplier or outsourcing a business process will follow. Different types of supplier relationships are then explored. The paper ends with a discussion of properly managing supplier relationships. 2. Mistakes to avoid in supplier relationships The first mistake that companies commit even before entering into supplier relationships is the lack of organizational/business process analysis. Companies often enter into supplier relationships without first knowing what the company really needs. These â€Å"unevaluated processes† blind a company from the areas where it excels and areas where it needs improvement (Aron and Singh 136). A company, then, might mistakenly outsource core p rocesses which are vital to its functioning, or manufacture in-house those components which can be sourced from suppliers at lower costs with same quality, for instance. Another mistake companies make involves getting into supplier relationships for the wrong reasons. ... Venkatesan talks about the fear of some companies on being â€Å"hollowed out† once they establish a relationship with a supplier (99). These companies fear that sourcing components from suppliers makes their products lose their unique qualities which make them less competitive. While this fear may have a rational basis, companies tend to forget the purpose of getting a supplier in the first place. 3. Factors to consider in sourcing Several factors need to be analyzed first before coming up with a decision of whether or not to source. A thorough analysis of a company’s areas of strength and weakness should be accomplished first. This analysis will help the company determine which processes are vital and, therefore, should be kept in-house, and those processes that don’t necessarily add value to the product and, therefore, are better left at the hands of a service provider or a supplier. Aron and Singh suggest differentiating the â€Å"core, critical, and commodi ty processes† of a business organization (136). Core and critical processes usually involve management and analytical processes while commodity processes are clerical in nature. Venkatesan, meanwhile, differentiates â€Å"strategic and non-strategic components† (100). When it comes to manufacturing companies, the decision to source from suppliers usually come from an understanding of the products strategic and non-strategic components. Strategic components, as decided by management, are those that make the product stand-out from the market. These components have a direct impact on the product’s quality, differentiation, and market position. Non-strategic components, on the other hand, don’t necessarily affect the outcome of the final product. This can be the screws of a DVD player, capacitors

Fault Detection Robot for Underground and Overhead Cables

Fault Detection Robot for Underground and Overhead Cables CAREER EPISODE 1 1.1 INTRODUCTION During my journey of engineering, I completed a project named Fault Detection Robot for Underground and Overhead Cables. It was completed in my 6th semester while pursuing Bachelor of Technology in electronics and communication engineering from Guru Nanak Dev University, Gurdaspur, India. It was performed under the guidance of Prof. Anu Sheetal. The entire project was completed in six months from January 2012 to May 2012. Thus, my very first career episode is based on this project performed by me. 1.2 BACKGROUND Normally most of the companies prefer to lay wires through underground. Wires are laid underground for various purposes. The reason for doing this is to protect the wires from any climatic conditions and changes. But while considering this positive factor there are cons of this method too. There occur problems while laying wires and during service and maintenance it becomes very costly, time consuming and difficult to fix and solve the issue. Also, cable can break due to any reason then it gets difficult to locate them and replace it. Basically, in manual technique of replacing cables, approximate location I found and the cables are dug out and manual checking is done to find the exact point of problem. 1.3 To overcome such challenges, I have designed a robot which can find faults and the place of complaint, making it easy for engineers and technicians to dig a hole at the precise place for error solving and fixation. The technology used behind the working of such robot is electromagnetic theory for detecting the discontinuity of the cable wires. Induced magnetic field is generated when a low frequency based signal can pass through the wire with the help of signal injector, which helps in finding the place of possible defect. The robot can locate the position of the fault or short-circuit issue from external surface and point out the exact place of discontinuity. 1.4 OBJECTIVES The main idea and goal behind employing such project is to benefit the industries laying wires underground for various electronics, electrical or other purpose. In this project an overhead wire fault detection and location system is introduced as the main or fundamental for industrially controlled computers. The project was executed to overcome the problem to repair faulty wires which required the help of experienced and practical trained operators. The accuracy and precision of short circuit fault detection is improved and upgraded by using the combinations of different methods like current rate of change and zero detection are used, along with using different and new technology based hardware and software. Features like 5th harmonic current and ground phase voltage drop was integrated to it. The project was used and put to operation and it worked in good running condition. 1.5 MY WORK DUTIES To implement and achieve success in this project, I started planning on how to approach the problem statement and what could be the possible solution for it. which followed by initial understanding on the working principle of the project. After making a work flow on the approach, I decided upon the components that were required for its implementation. A budget was made and followed all the time and a safety level was maintained during the progress of the project. Later staged involved in planning and designing of the PCB layout based on the block diagrams and the circuit diagram. Coding was done for the working of the project which was followed by performing certain tests and troubleshooting the whole device to find any faults and resolve them on time. The last stage involved preparation of the presentation and reports. My duties also involved meeting the supervisor weekly and updating her about my project progress. 1.6 PERSONAL ENGINEERING ACTIVITY The execution part for my project began with outlining and understanding of all possible differences amongst industrial robots, service robots and their process of application or working. Along with that I also analyzed the challenges that are faced due to its application and different methods that could be employed to detect the fault and isolate the faults. I also included few examples for comparison of methods relating the situation. Based on their experimental results, I came up with my block diagram for the project. It has two parts one for the robot and other about the remote. 1.7 After finalizing my initial block diagram, I listed out the components that were required for the hardware structure of the robot and the remote. The components used are described below: 1. For Power Supply    Diodes of 1N4007, Capacitors of 1000 and 100  µf, IC7805, LEDs, Resistors, Push Buttons. Using these components, a power supply consisting of three parts namely, the rectifier unit, filter unit and regulator unit is designed for giving supply to my device. 2. LCD 162    for displaying the location of faults by displaying a message or small written signal 3. Tx IC HT12E 4. Transformer 0-12V and 500mA 5. Motor driver IC L293D 6. RxIC HT12E 7. Buzzer for alerting on finding a fault in the wiring 8. Transistor BC547 9. Motor 60rpm, to drive the robot 10. Microcontroller ATMEGA16, the coding and the program is written and loaded into it for the functioning and signaling of the robot. 11. Magnetic field sensor ZMY20, extremely sensitive sensor which is used for measurement of magnetic field or detection of magnetic ports. It has magneto-resistive effect of thin film perm alloy. 1.8 With the help of above components, I started to design and implement my hardware. I started with designing the power supply and then the robot. After completing the structure for the robot, I made a remote to operate it from a distance with the help of IR radiations. Once my whole device/robot was ready, I mapped a flow chart which described the working and the functioning of the device. The flow chart took lot of efforts as every small point had to be noted for the functioning of the robot. The flowchart can be seen below. 1.9 The core idea behind this robot was for short circuit detection that occur in the underground cable breaks. The continuity of the cables is first checked using a multimeter as the cables are laid across large areas. After detecting the stretch of wire where the problem of discontinuity occurs, the robot is made to use for detecting the final and precise location of the breakage or fault. External remote navigator circuit is used for the robot and it is placed on the cable. A wire is also connected to the signal generator unit. The robot is positioned in such a way that the discontinuity lies in the forward direction and the robot moves along that direction. 1.10 A 3KHz signal is passed through the wire and a power is supplied to the robotic unit. An electromagnetic field is generated as per the Faradays law, after the current starts receiving and moves around. This electromagnetic field will generate a voltage that will be provided using the microcontroller RA0 pin and thus controlling the movement of the robot. On reaching the point of discontinuity the robot will not generate electromagnetic field, which will trigger the buzzer circuit connected to it indicating the fault and location of the issue. The HALL sensor unit can be used and provided to get the exact distance that the robot moves in finding the discontinuity and the LCD module connected to it will display the details. Once the location of fault is found, the cable operators and technicians can dig that ground and resolve the problem easily. 1.11 Based on the working, I planned the flowchart for the coding and programming part of the circuit. I used the software called BASCOM-AVR which supports the 8051 microcontrollers and Atemls AVR microcontrollers. Both coding and testing can be performed using this software. I wrote a code for the below flow chart and successfully loaded it into the microcontroller to check its working. Robokits AVR USB programmer is used to load the program that is made in BASCOM into the microcontroller after generating a HEX file of the program. The best advantage of working on BASCOM is that it has menu options specially for troubleshooting your program. 1.12 After completing both hardware and software part for this robot, I gave it a test run to see its functioning. I faced an issue while running the robot, initially it didnt detect or generate an electromagnetic field which was required to detect the faulty cables. So, I made use of magnetic read switch which could generate magnetic field of 440V or above and It was cheaper than the magnetic field sensors. On considering the safety perspective, there was a risk due to the use of high voltage of 440V. Thus, I decided to use a magnet to generate the require magnetic field and current instead of providing such high voltage supply. So, once the robot senses the magnetic field around the magnetic read switch that is generated with the help of magnet, the buzzer will start to work. Another issue was replacing this component i.e. to replace the magnetic sensor with a magnet because all the connections were done and the circuit could get complicated. To do that, it took lot of patience and it h ad to be done carefully. This was the major problem I encountered during my project. 1.13 SUMMARY Thus, to save the manpower and wastage of time, I developed such robot that detects the faulty cables. I believe it will be helpful to various companies. The robot is designed to be user-friendly and easy to access. It is also cost-effective and controlling and maintenance is very easy. It has lot of scope for expansion, it can be used to detect faults at places which is not accessible by human hand or places which require large amount of safety. 1.14 This project was the first project of my bachelors degree, so it held lot of importance, and it taught me a lot. I gave a final presentation and a report document stating the work I did and the completed working and description of the project. I presented it to my faculty staff and in front of my classmates. I got good help and support from my guide in all difficult situations. It used my basic programming knowledge. It boosted my confidence in my field. I got motivated and inspired to implement and research new projects which would use more advance electronics and telecommunication knowledge.

Review sheet

Infrastructure such as roads and electricity Is only completed In some areas. What's a â€Å"growth pole†? An urban center targeted for development of key economic and social infrastructure to promote regional economic development ( roads, electric grids, schools, markets, and medical facilities) Brazil Chapters 13 & 15 What are the historical, economic, and cultural factors which make Brazier's Atlantic coastal plain region different from the rest of modern-day Brazil? From where and why did Brazil move its capital to Brasilia in the sass? Strategic reasons: ROI De Jeanine is on the coastline and they wanted to move the capital inland n case of an Invasion. It Is much easier to defend a capital Inland because you have more time to prepare versus a capital that Is on the shore. – to Develop the heart of Brazil. Until the construction of Brasilia, there wasn't anything there. The central region of Brazil was totally undeveloped as the population lived mostly along the co astline. They figure that if they moved the capital inland, people would move there and develop that area.They were proved right! Fact shaped the social & economic geography of the region? â€Å"backwoods† lots of drought, rolling hills, mountainous Be able to locate the areas of Brazil in which populations are either mostly European or African (in terms of origins) the majority European population is in the far south Brazier's recent foreign policy has been to promote a â€Å"polytechnic world† – what does that mean? IA world n which one or two countries cannot dominate global affairs (as was the case during the Cold War). What is the nature of U.S-Brazil relations? Latin American Socio-Economic Development Chapter 16 What's the difference between Rosters â€Å"Stages of Economic Development† and the Dependency Theory proposed by Latin American economists? Roosts: Says that they are poor because they are not fully integrated into the global economy. Depe ndency theory: Argues that countries are poor because of how they were integrated into the world economy. Are there any geographic patterns to development in Latin America? If so, what are they? What might be the explanations for these patterns?What's the difference (in terms of advantages & weaknesses) between the â€Å"import- substitution† model of economic development and the â€Å"export-led growth† model? [also discussed in Chapter 18] Import-substitution: a country should attempt to develop as much of its industrial opacity as possible internally, without depending on foreign imports +: creates Jobs, protectionism -: protectionism leads to dynamic inefficiency; domestic producers have no incentive from foreign competitors to reduce costs or improve products; impedes growth through poor allocation of resources; effect on exchange rates harms exports.Export-led growth: a trade and economic policy aiming to speed up the industrialization process of a country by exp orting goods for which the nation has a comparative advantage -: less economic diversification; subsidies for specific industries runs a risk of encouraging the wrong industries What are â€Å"the Washington Consensus† and â€Å"structural adjustment plans† and how are they related? A set of free market economic ideas, supported by economists and international organizations, like the MIFF, the World Bank, the EX. and the US; advocates free trade, floating exchange rates, free markets and macroeconomic stability.What is meant by internal regional differentiation (in terms of development)? In particular country are greater than between countries; Mexico and Brazil The Pampas (& Southern Cone) Chapter 17 Where are the Pampas? (be able to locate) Why is Buenos Aries often referred to as the â€Å"Paris of South America†? It's architecture is influenced by European architecture and rich European heritage In which ways is urban primacy evident in the Southern Cone (Ar gentina, Chile, Paraguay, Uruguay)?Argentina: Buenos Aries Chile: Santiago Paraguay: Asuncion Uruguay: Montevideo Which technological advancements changed the agricultural economy of the pampas and Argentina in general? What are the physical and human geography factors behind the robust wine industries in Chile and Argentina? Latin America and the Global Economy Chapter 18 What are some of the problems associated with dependency on a few primary commodity exports? How does Chile's physical geography & location provide it comparative advantage in the export of agricultural products?Many countries in South America are dependent on commodities and looking toward â€Å"economic diversification. † In which ways can â€Å"diversification† be understood? Numerous vs.. FETA What is going on here in the competition between these two visions of free trade in the Americas? What is the role of China in the Latin American economic boom of the sass? How does Latin America's growing middle class further integrate the region into the global economy? The Amazon Basin is what type of physical feature? Which 5 countries have significant land area in the basin?What are some reasons why there is global interest in protecting the Amazon rainforest's? What are the main drivers of deforestation in the Amazon Basin? What were some of the resource booms of the past which affected natural and human systems in the Amazon? What have been the primary objectives of Brazilian government projects in the Amazon region (e. G. March to the West†, growth poles, road building)? Latin American Diaspora – Chapter 20 What are terms used to describe the Latin American Diaspora in the U. S.? How have these terms caused confusion?Hispanic- most widely used in the eastern US states; Latino- most widely used in the West and Midwest of the US Chicane- a term used by Mexican political activists; lots of Aztec and messiest pride associated with this term Hispanic- used by the Spani sh speaking natives of the Upper ROI Grandee Valley in New Mexico and Colorado. Which areas in the U. S. Are home to large Latin American populations – and why? Typically the southwestern US is home to large Mexican populations, Arizona, New Mexico, Texas, California, New York, Florida, Illinois have the largest Hispanic population stretching from Texas to California.They settled in the areas that once used to be a part of Mexico. Mexican workers and immigrants also reached the Midwest in small numbers. Areas with Jobs in agriculture, manufacturing, construction work To which other countries have Latin Americans tended to migrate – and why? Spain, Italy ,UK, Germany, Portugal From Student Presentations Cooling Christian's presentation – who were the Sandiness and why did the U. S oppose them? Sandiness: a social democratic political party in Nicaragua; the U.S opposed them because they were afraid that they were going to become a Cuban- style communist governmen t allied and Reagan wanted to prevent the spread of Eric Dodson presentation – What were the San Andrea Accords and what did they promise and to whom? San Andrea Accords: Allowed indigenous people to have the right to self-determination of an autonomous government, full access to Justice, representation in politics, increased employment opportunities, and the promotion of culture and education. Mike Kennedy's presentation – Why does the Quiches language struggle for status & domain even in countries such as Bolivia and Peru?The Quiches language has to compete with Spanish language which is seen as a vehicle for upward social mobility. Rural to urban migration has also caused many to stop speaking the language Low prestige of the language and stigma surrounding Quiches also prevents people from speaking the language The domain of the language has been reduced to rural Andean villages and the homes of native speakers, there are few places in public and urban settings whe re the language is spoken Alice Millard – Why/How might the U. S. Trade embargo on Cuba been seen as a positive situation? It has forced Cuba to become self-reliant and invest in their own healthcare and pharmaceutical industries since it was not allowed to but American medical equipment or use American drug patents. – It also opened up more markets for Cuba to sell its cash crops to since American refused to import their goods. Ron Trumann – What is the Panatela and why is it important? One of the most immense and biologically rich environments on the planet Wetlands provide countless economic, ecological, cultural, recreational and aesthetic valuesConcentrated and diverse flora and fauna Cumulative (from Exams 1 & 2) Why is Latin America considered a region? Which countries in Middle & South America are often excluded from the region and why? To what do the terms messiest and mulatto refer? Where were the two main Meridian cultural hearths? What is a cultural hearth? How did the Incas (as well as modern-day Andean peoples) utilize latitudinal conation in food production? What were/are the impacts of the Columbian Exchange? What basic patterns (physical and social) did the Law of the Indies establish in terms f city planning in colonial Spanish America?What was the one fundamental difference between western Europeans and indigenous Americans in their understandings of land and its value? In which ways are haciendas and plantations distinct forms of latitudinal? What are masqueraders and what explains their geographical distribution? masqueraders are manufacturing plants that are typically located near the US-Mexico border. Their close proximity to the border helps reduce transportation cost to send the finished products to the US, which is their biggest consumer. What tectonic process has/is creating the Andes?What cultural and economic role does coca have in the Andean region, especially Bolivia? Why did population projections for Latin America made in the sass end up incorrect? They didn't take into account the changes in healthcare and the economy. Birth control was introduced to the population which helped to reduce births and population. What makes an Meridian a â€Å"decent† or â€Å"reasonable† person (gent decent or gent De razz ¶n) in the minds of many Latin Americans? The economies of Central American countries traditionally have been dependent on †¦? What is CAFTAN and how has it changed Central American economies?

E Marketing Essay

Background of the Study Marketing plays a vital role in economic growth in the present global world. It ensures the planned economic growth in the developing economy where the scarcity of goods, services, ideas and excessive unemployment, thereby marketing efforts are needed for mobilization of economic resources for additional production of ideas, goods and services resulting in greater employment. Marketing stimulates the aggregate demand thereby enlarges the size of market. Marketing in basic industries, agriculture, mining and plantation industries helps in distribution of output without which there is no possibility of mobilization of goods and services which is the key point for economic growth. These industries are the back bone of economic growth. It also accelerates the process of monetizing the economy which in turn facilitates the transfer of investible resources. It helps in discovery of entrepreneurial talent. Intermediate industrial goods and Semi-industrial products etc. ssentially marketed for industrial purpose in order to develop the industrial sector with a view to economic growth. Today the trend of ICT development is gaining larger influence over countries’ development and growth. It would not be surprising to see the elements that evolved from the developments of ICT (such as e-commerce, e-marketing, e-business, and e-learning) have increasingly provided support toward enhancing countries’ growth and development, especia lly in highly sophisticated abstract. As the trend of ICT development is gaining larger influence over countries’ development and growth, e-commerce plays an important role in enhancing the growth of several developed and developing economies over the 21st century. This chapter aims to build the analytical base to support the importance of the development of e-commerce by investigating the role and contribution of e-commerce to economic growth and development. The chapter first investigates past contributions of e-commerce to economic growth in developed countries. Second, past research findings and frameworks are utilized to investigate the contribution of e-commerce toward economic growth, focusing on the case of e-commerce in Tanzania. The study found that e-commerce plays an important role in enhancing the economic growth of Tanzania. Two important findings supported the growth of e-commerce. First is the increase in sales generated by the use of e-commerce. Second, e-commerce induces the productivity development of firms through higher competition and innovation. E-Commerce Contribution to Economic Growth: The Case of Tanzania industries. The introduction of e-commerce and e-business seems to create a tremendous contribution to the growth of many developed nations and is continuing its increasing impact on the developments of many developing economies over the 21st century. Some recent literature pointed out the increasing contribution of e-commerce toward economic development in several developed countries such as the United States, Canada, Australia, and the United Kingdom (Adam, Mulye,Deans &Palihawadana,2002).

3D Printing for Educational Purposes

3D Printing for Educational Purposes 3D Printing for Educational Purposes Can’t Imagine Abstract Things? Just Print Them! 3D printing is a hot topic in education these days, and this ever-developing technology is helping students grasp abstract topics and ideas. From fine arts to math, universities everywhere are using 3D printers in the classroom – and here’s why! 3D Printing – It’s an Art! From Sculpture 101 to culinary school, 3D printers are being used more and more within the arts, and with amazing results. Architecture students can use the printers to recreate their designs, allowing them to examine how their structures will look in the real world and make immediate tweaks and changes to improve their designs. At culinary institutes, students can design new and different cupcake and loaf pans, cookie cutters, and decoration molds, ensuring that they are able to stay at the forefront of food aesthetics. Turning the Abstract into Concrete Math is full of abstract and theoretical ideas that can be challenging for students to grasp. Using 3D printers to visualize and create mathematical concepts, shapes, and curves makes it much easier for students to understand how a theorem or shape actually appears in reality. 3D printers also make it easier for professors to effectively teach these ideas, as they ensure that both audial and visual learners have an equal footing in the classroom. Engineering New Ideas Many engineers pride themselves at being at the forefront of technology and innovation, so it only makes sense to have the latest technology – such as 3D printers – in the classroom. Students can learn from this new manufacturing technology itself, as well as utilize it for their own designs and to solve engineering problems. Using a 3D printer to create prototypes can help students to actually test their engineering skills and to physically see where improvements may be needed. Students can also see how existing parts, such as the various components of a car engine, may be modified – they can then print and test these, thereby creating innovation within the engineering industry through printing! Anatomy (Past Present) in 3D The human body is one of the most complex machines on the planet, and students everywhere – be them freshman biology students or final year medical students – are learning about anatomy through the use of 3D printers. By creating 3D images and cross-sections of organs, nerve systems, and the brain, students have one of the most effective study aids on the planet! In addition to the workings of the human body, 3D printing can also help archaeology students to examine artifacts, skeletal remains, and fossils in greater detail. By printing such artifacts, students are able to physically handle what would normally be ‘hands-off’ materials from museums, exhibitions, and archaeological digs. What were once abstract concepts and 2D pictures or diagrams are suddenly brought to life in the classroom using 3D printers, helping students become better learners and critical thinkers. Whatever you’re majoring in, it’s likely that a 3D printer will be coming to your classroom soon! The advantages it gives to both students and professors make this an important tool for learning across the arts and sciences – hopefully you’ll get to try one out for yourself! Additionally, you can get a custom essay on 3D Printing topic from our essay writing company.

Twelfth Century Renaissance How Francis and his Franciscan Brothers both Reacted and Benefited from its Development

Twelfth Century Renaissance How Francis and his Franciscan Brothers both Reacted and Benefited from its Development Introduction Many areas of Western Europe, particularly Italy, Germany and England had greatly advanced in various areas by the beginning of 12th century AD. For instance, there were advances in social organization, technology, education and economic systems (Haskins 73). The need to acquire new knowledge and develop institutions of leaning was rapidly increasing, especially in religion, theology and nature. Most people were eager to learn religion, natural science and law in a different way. In general, people were tired of traditions and wanted a change in social and cultural aspects. In addition, people were easily accepting and embracing new ideologies. For instance, Italian cities and city-states such as Florence and Rome were changing due to the presence of scholars in philosophy, law and religion (Haskins 88). Any person who was willing to instil some change in the social system was in a position to influence large numbers of people. In fact, great leaders during the 12 centur y were supported by a public opinion. The desire for change motivated leaders to inspire their societies in a significant way (Benson, Constable and Lanham 53).Advertising We will write a custom essay sample on Twelfth Century Renaissance: How Francis and his Franciscan Brothers both Reacted and Benefited from its Development specifically for you for only $16.05 $11/page Learn More All these aspects and changes in leadership contributed to the 12th Century Renaissance. The emergence of great religious leaders at the time is perhaps one of the most important aspects of the renaissance (Moorman 28). However, the emergence of St Francis of Assisi was one of the main forces that opposed change in various regions. Francis and his followers (Franciscan Brothers) created a religious movement that greatly supported the way in which the church handled social, religious and cultural issues. They were advocating for spiritual life. In addition, they advocated for the ‘role and duty of poverty’. In turn, this stand appeared to support the doctrines of the Church. Arguably, Franciscans reacted negatively to the people’s quest for change in Catholic leadership. However, they later benefitted from the 12th century changes as they sought to free their movement from the church’s political and social influence. Economic and Social Features of the â€Å"Twelfth-Century Renaissance† Changes in various aspects of Christianity had the greatest impact in the contribution towards social, cultural political forms. Barbara Tuchman, a historian argues that Christianity was a key pivot in medieval life â€Å"because it governed all aspects of life such as birth, marriage, sex and death† (Moorman 31). The historian says that Christianity controlled the law, medicine, science, and politics (Benson, Constable and Lanham 64). In addition, Tuchman argues that being a member of the church was a compulsory for every person (Moor man 51). Although the church was the dominant force that supported political and religious leaders, there were several efforts to change this system in the 12th century. For instance, the people were eager to see a church that was meant to care for them.Advertising Looking for essay on history? Let's see if we can help you! Get your first paper with 15% OFF Learn More Thus, church leaders such as St. Bernard of Clairvaux became important figures of change during the 12th century because they were entirely dependent on public desire to change (Moorman 114). One of the areas that people wanted change was personal devotion to a common person, which had been a common aspect of the Catholic Church. Apart from forced membership, the church also required the followers to regard the popes, monks and clerics as religious and righteous figures (Benson, Constable and Lanham 171). In fact, it appeared that these church leaders were â€Å"gods† in some way, which g ave them political, social and cultural powers to control the society. Similarly, political aspects of life were under the control of the church. Any person with ideas on how to liberate the society from the church’s monopolistic control received an overwhelming support from the public. For instance, King Henry II of England obtained massive support and political strength because he was willing to do what the people wanted (Haskins 133). Apart from the religion, the concept of justice was in dire need for change. According Haskins (143), the Church controlled the concept of justice system because every aspect of the law was based on divine law. The world politics revolved around the church, which in turn controlled justice system. The public was willing to change these aspects. It was during the 12th century Renaissance that the people of Western Europe, especially Italy, made great efforts in an attempt to free the judicial system from the divine law. For instance, Roman law was increasingly studied and revived. Gratian, a monk, became an important figure of change after he gave a summary of the laws of the church in his â€Å"Decretium Graiani†. Finally, the desire for knowledge was on the increase during the 12th century. Thousands of people from across the social classes sought to know more in science, religion and law. They wanted to learn these aspects free from the influence and control of the church. For instance, 12th century scholars joined Latin classes, attempted to analyze the Roman law and the Catholic doctrine. In addition, scholars attempted to learn and analyze Muslim faith and laws, Greek laws and other texts in order to compare them with Catholic laws. For example, Peter Abelard made significant influence in education and law because he developed ideologies that attracted people.Advertising We will write a custom essay sample on Twelfth Century Renaissance: How Francis and his Franciscan Brothers both Reacted and Benefi ted from its Development specifically for you for only $16.05 $11/page Learn More How did the Franciscans react and benefit from the changes in the 12th century? Although the Franciscan brothers and their movement did not support the changes in the 12th century, they later benefitted from it in a manner that allowed them to spread their new ideologies, interact with the people and obtain support from both the public and the clerics (Senocak 192). At first, Francis of Assisi himself reacted negatively to the changes the people wanted to see in the church, its leadership and control of social and political aspects (Sharp 126). For instance, with his group of about 11 followers, Francis travelled widely in Western Europe, where he preached the need to maintain the church traditions against the people’s desire for change. For example, Francis preached in support of poverty among the Christians because he believed that Christians should devote their life (Senocak 136). He had a collection of scriptural passages from the bible and the church emphasizing on the duty of poverty. However, the Franciscan brothers did not provide a solution to problem created by superiority of clerics at the expense of the poor (Sharp 102). Due to the ideologies that supported the church, the clerics, the pope and the monks to an extent that they were given food, housing facilities and other things (Sharp 96) supported the Franciscan brothers. For instance, Pope Innocent III considered the â€Å"Three Orders† developed by the Franciscans as a good tool for spreading his influence in order to deal with the 12th century religious renaissance (Senocak 224). The pope thought that by supporting the Franciscans, he would persuade the people to maintain a status quo rather than calling for changes. In fact, the church considered the 12th century changes as a form of heresy. Despite their support of the church and the status quo, the Franciscans later benefitted f rom the changes brought by the 12th century renaissance. For instance, the control of â€Å"the Order† became a problem to the Franciscans. At first, the Franciscans had received support from the church, which gave them certain political and religious powers in certain areas such as France and Germany (Senocak 216). However, several followers disagreed on the role and duty of poverty. There were disagreements on how Franciscans should live and lead the church. In addition, Elias, one of the most powerful Franciscan leaders, assumed the powers to govern a centralised government in Assisi. He sought to re-interpret the role of poverty (Sharp 56). He built several houses for the members.Advertising Looking for essay on history? Let's see if we can help you! Get your first paper with 15% OFF Learn More He was in constant disagreement with the Pope and Italian President Gregory IX. Eias was deposed and replaced by Alberta of Pisa (Sharp 29). Due to the influence of the Pope and the government in Franciscan leadership, it was clear that the Franciscans needed to advocate for change in church leadership in order to maintain their influence (Sharp 34). Members increasingly saw the need to change the church and reduce its control on the politics and their movement. Since the 12th century Renaissance had succeeded in reducing the influence of the church on social, political and economic aspects of the society, the Franciscans benefitted from these changes in their efforts to reduce the influence of the Pope and the church in their movement. Benson, Robert, Giles Constable, and Carol Lanham. Renaissance and Renewal in the Twelfth Century. Cambridge: Harvard University Press, 2006. Print Haskins, Charles. The Renaissance of the Twelfth Century. Cambridge, MA: Harvard University Press, 20 07. Print. Moorman, Humpidge. A History of the Franciscan Order: From Its Origins to the Year 1517. London: Franciscan Institute Publications, 2008. Print Senocak, Neslihan. The Poor and the Perfect: The Rise of Learning in the Franciscan Order, 1209–1310. Cornell: Cornell University Press, 2012. Print Sharp, David. Franciscan Philosophy at Oxford in the Thirteenth Century. London: Oxford University Press, 2003. Print

Small Business Program and Source Selection Plans Essay

Small Business Program and Source Selection Plans - Essay Example ibed as a privately owned business that is not dominant in its field of operation, and that falls within the definition recognized by the Administrator of Small Business (Compton, 2009). The standards of evaluating the size of the business are determined by the number of workers, mean annual gross income, and relative size of other businesses in the same industry (Keyes & Feldman, 2011). Small business program is used for reviewing the capacity of the small businesses to compete effectively in particular industries. The amendment of Small Business Act in 1978 by the congress provided for the heads of agencies in collaboration with Small Business Administration (SBA) to set-aside the value of the "total contract and subcontracts to be awarded to small businesses every year" (Manuel & Lunder, 2012). In 1988, the congress made further amendment to establish a provision for the establishment of government-wide objectives of awarding proportion of the federal contracts and subcontracts dollars to small businesses in various categories (Cibinic et al., 2006). The provisions require a proportion of equal to or greater than 23% of the government contracts awarded to small business, 5% to business owned by people with disability, 5% to small businesses owned by women, 3% to small businesses owned by service-disabled and 3% to Historically Underutilized Business Zones (HUBZone) small businesses (Keyes & Feldman, 2011). However, if the total value of the contract is above $2,500 and not exceeding $100,000 the whole contract can be awarded to small businesses that have the capacity to deliver the requirement (Cibinic et al., 2006). Awarding of the contracts to small business by the agencies is of the essence to the government because it depicts the efficiency with which the congressional policy of empowering small business is being implemented (Compton, 2009). However, following the criticism that the government was not achieving its goals of empowering the small businesses

Discussion 2 Assignment Example | Topics and Well Written Essays - 250 words - 6

Discussion 2 - Assignment Example The second issue explains the need for the American voters to protect the wellbeing of their families. According to the advert, this will be achieved through safeguarding and increasing the employment in the manufacturing sector, which employs thousands of Americans. The advert encourages the voters to vote for a new president, who will ensure the growth of the American manufacturing sector. The discussion on the second post explains two quotes. The first quote illustrates that individuals do not desire intimidation, and that people usually find ways of preventing threats to their wellbeing. The 2012 political advert developed by the Republican Party, jokingly illustrated Obama as a national security threat. This was in an attempt of influencing the American voters to strongly vote in the Republican presidential candidate. The emotional appeal was aimed at ensuring Republican victory in the presidential elections. The second quote shows that the Obama administration operated from one disaster to another. The joking illustration of the continuous disasters was in the form of a Pink Panther cartoon. The disasters represent the despised relationship between Obama and the Russian

Skills Approach best describes my leadership style Research Paper

Skills Approach best describes my leadership style - Research Paper Example These approaches can be seen as supporting each other because they offer dissimilar opinions on leadership from the perspective of skills. In the approach suggested by Katz in the 1955 Harvard Business Review, in the article titled â€Å"Skills of an Effective Administrator†, he acknowledges three diverse abilities that a leader ought to have. They include human skills, technical skills, and conceptual skills. Katz stated that these skills are rather dissimilar from traits of leaders. Skills are what leaders can achieve, while traits are who leaders are (Northouse, 2009). A technical skill is understanding about and capability and aptitude in a precise work or activity. For instance, to use definite computer software packages (like MS Excel) is a superior technical skill. A human skill is one that allows one to collaborate with people. It is dissimilar from technical skills, which have to do with things. These skills help us to cope with people and to correspond and work within teams. A conceptual skill refers to abilities to work with initiatives and concepts. These skills facilitate our understanding and put leaders in a position to better choose the actions and measures that have to be adopted in a specific field of work. Based on his deductions, Katz affirmed that the level of significance of each assortment of skills (conceptual, human and technical) was openly correlated with the degree that the individual has in the firm. The aim of this paper is to describe my leadership style using the skills approach. My leadership style is best described b y the skills approach, which illuminates my basis as a leader along with my inclinations to the function of leadership. The skills approach further underscores the inherent skills and abilities that denote my leadership style. The skills approach best describes me as a leader in the sense that it underscores my abilities and skills to perform the function of leadership and

Jobless Essay Example for Free

Jobless Essay Millions of workers have lost their jobs due to downsizing. At the same time, many organizations are complaining that they cannot find qualified people to fill vacancies. How do you explain this apparent contradiction? A recent news came out dated June 6, 2013 by Reuters that Philippines jobless rate stood at 7. 5% in April, the highest in three (3) years according to the National Statistics Office (NSO). Philippines is said to be the Southeast Asian country with the highest rate of unemployment even the fastest growing economy a jobless growth indeed. Downsizing strategy is common nowadays in business sectors and firms. This is to improve the financial performance of the firms by reducing the cost they invested in human resources, increase productivity to whom that is left and increase the speed of decision-making by reducing the layers of management and becoming closer to the customers. A lot of workers were affected due to downsizing. Moreover, not to affect the overall performance of the business, workers that is left must be the best ones. These are the people that are capable in doing the job, not only to fill the vacancies but have contributed well enough to the business, functioned well or even exceeded the job expectations from them. Working experience and educational background helps this people to be more competitive compared to others. This, I termed as the qualified people. They are the effective ones. Business sectors are keeping them. These people are their aces. They are the organizations apple of the eyes. That is why they are hard to find. Few are considered qualified people. Millions of people maybe looking for jobs but are not qualified. It is because these people, considering the poverty growth in the population, they work practically for money. Self-improvement may only be a secondary reason which includes behavior towards work, leadership skills, quality work and the like. On the other hand, qualified people prioritize self-improvement, and, in turn, money comes naturally.

Picture Smart:Spatial Reasoning and Its Role in Cognition :: Psychology Essays

Picture Smart:Spatial Reasoning and Its Role in Cognition There are many theories about the nature of intelligence. The formal definition of intelligence is "the capacity to acquire and apply knowledge." One aspect or kind of intelligence, according Dr. Howard Gardner, founder of the multiple intelligence theory, is spatial intelligence(1). Spatial intelligence is one amongst eight kinds of intelligence. The most common description of spatial intelligence is the ability to be able to recreate one's visual experience and reasoning about shape, measurement, depiction and navigation. Spatial intelligence might be one of less familiar kind of intelligence, however it has wide implications in many academic and professional disciplines. It is extremely important in disciplines such as mathematics and computer science. Spatial Intelligence also accounts for the thinking process of engineers, architects, designers, sculptors and inventors. This paper is an over all comprehension of spatial reasoning and why it is important in learning and problem solving, it is an investigation into what spatial reasoning is and its role in learning and cognition. This paper will also address the neurobiology of spatial reasoning and discuss the specific areas and organization of the brain that accounts for spatial intelligence. There are many theories and models attempting to define spatial reasoning. The first model is called the MV/PD model. According to this model, spatial representation consist of two parts. The first is a metric diagram, which includes quantitative information and provides a substrate, which can support perceptual-like processing. The second part of the model is termed place vocabulary, which makes explicit qualitative distinction in shape and space relevant to the current task (2). Therefore, spatial reasoning is not just visualization of objects and space but also the ability to take qualitative information and then transformation them to spatial representations so that it can be better understood. Spatial reasoning is useful in physics, math and computer science and can be applied to different industries. Engineers use graphs to express complex relationships, such as temperature-entropy or pressure volume plots, Often these graphs are sketches, intended to convey qualitative information about the shapes of curves and relative magnitudes rather than precise numerical values(2). Therefore, spatial reasoning is an essential part of the thinking process of scientist and engineers because they need to understand and interpret qualitative information in graphs and models in order to gain critical understanding of the problems at hand. What exactly is the process through which humans use spatial reasoning to solve problems?

Eating Disorder Research Paper Essay

Media and society are often looked at as a source of daily entertainment, gossip and news. Every day, people are constantly exposed to thousands of images of glamour, beauty, celebrities, and much more. The media is so compelling that it has the power to change what people believe in. The images that are shown repeatedly make a way into teenagers mind and they want to be a part of what the media shows. Teens feel the need to change their body to look a certain way and be like someone else. But a fact unknown to teenagers is that even celebrities’ body are not perfect. The most common eating disorders are anorexia nervosa and bulimia nervosa. People with anorexia have a huge fear of gaining weight and a change in their body shape and size (â€Å"Eating Disorders†). Anorexia has been characterized as a â€Å"rich white girl† disorder because most anorectics are white and about three-quarters of them come from households at the middle income level or above (Davidson and Fundukian). Bulimia on the other hand is when a person eats large amount of food over a short period of time then later performs activities to try to burn the calories off. Binging is the most common symptom of bulimia and it is often done when trying to get rid of the food eaten. Bulimia is thought to affect around 1% to 5% of teenage American girls and up to 3% will be bulimic at some point in their life (Arnold and Walsh 30). Studies show that â€Å"media exposure has a direct impact on disorder symptoms and indirect effects through gender role endorsement, ideal-body stereotype internalization and body satisfaction. † The covers of magazines display pictures of both men and women whose images are offered as near perfection in society. â€Å"Research has shown that even brief exposure to ads showing highly attractive models results in decreased satisfaction with one’s own appearance† (McMurray). Teenagers should know that celebrities are not magically beautiful and thin, they are made to look that way. â€Å"Today’s culture is unique in that the media is a far more powerful presence than ever before† (Derenne and Bersin). The media has been named as a causative factor for body dissatisfaction, which promotes unrealistic standards of female beauty and show images that create and reinforce cultural definitions of attractiveness. (Qtd. in Wexler). The media opens the door of eating disorders to teenagers and brainwashes them into thinking that being thin is important and necessary. The media needs to be very careful in the messages that they give to teenagers regarding body image. Dr. Bond says how â€Å"the media should be more responsible in not publishing pictures of very thin models and celebrities because young people wish to emulate them. Eating disorders are not going away, if anything they are becoming more common (Thinspiration? ). Advertisements everywhere continually expose the notion that losing weight will make people happier. Advertisements that show thin celebrities reach out to individuals telling them what they can be or become if they were thin. By looking at these advertisements, women start to feel insecure about the way they look. The NEDA reports that â€Å"women’s magazines contained 10. 5 times more advertisements and articles promoting diet and weight loss then were found in men’s magazines. It also reports that a study of 4,294 network television commercials revealed that one out of every 3. 8 commercials conveyed some sort of attractiveness message of what is or is not attractive† (Qtd. In Wexler). Many women frequently compare their bodies to those around them and the body images on advertisements lowers their self-esteem. The advertisements of celebrities affects the stereotypical idea of an ideal body which leads to eating disorders (Stice et al 5). Online, there are websites that promote anorexia. Teens with anorexia can then put up pictures of their skinny bodies for other anorectics to see and feel encouraged by. They feature pictures of celebrities such Keira Knightley and Victoria Beckham that promote 400-500 calories a day diet. In a year alone more than 500,000 people visited the sites and a 2011 EU survey found more than one in five six-to 11-year olds had been exposed to one or more sites with these â€Å"harmful content† (Thinspiration? . Teens who are anorexic feel that having an eating disorder is not a bad thing. They look upon each other for support, telling each other secrets of losing weight. The quote â€Å"Nothing tastes as good as skinny feels† by Kate Moss is popular among these pro-anorexia websites (Wardrop). TV shows also send the message to be thin to whoever watches them. Disney Channel, which attracts millions of viewers, especially the young, made fun of eating disorder and actually promoted the idea of being thin. In the show Shake It Up, someone stated â€Å"I could just eat you guys up, you know, if I ate† (â€Å"Party It Up†). In another Disney show, So Random, a conversation goes on where one character tells another â€Å"Angus only eats one full meal a day† to which Angus replies â€Å"My agent’s always on me about looking my best (â€Å"Colbie Caillat†). Disney thinks about eating disorders as a joke which is not dangerous. For many kids, the people on Disney are their role models, and if kids see their role models not eating, they are going to think that it is okay to not eat. Also if Disney encourages the idea of not eating that kids will do the same thing. Demi Lovato who battled an eating disorder attacked Disney about these risky messages that they send to kids. Experts say that Lovato opened the Pandora’s Box about the dangerous effects television shows can have on the negative body image of young women (â€Å"Disney Pop Star†). Even in other TV shows, the overweight characters are most likely portrayed as lazy and the one with no friends, while thin characters are successful and popular. This also sends a message that in order to be successful in life a person has to be thin. Teenagers feel pressured into looking the way society wants them to look like. Everywhere they go, they see posters of celebrities enhanced to look â€Å"perfect. Society thinks that if someone does not look a certain way then it is not acceptable and that they should change how their body looks. From a young age, women are given the message that in order to be happy, they must be thin. Thousands of teenage girl starve themselves to attain what the fashion industry considers to be the â€Å"ideal† figure (Thompson). Society has become obsessive and prejudiced when it comes to body image. Society and media work together to get that one message across to teens today; to be thin. New diets come out every month and media spends money trying to advertise them and get celebrity endorsements. In stores, the front pages of magazines show that one celebrity that everyone looks up too. How they talk about that one diet that â€Å"changed their life† and made them â€Å"happy† again. Teens think that if these celebrities can be skinny, then why can’t they? Teens spend their times looking at websites and magazines that tell them how to be skinny. By constantly portraying â€Å"perfect† bodies in the media, it promotes unhealthy eating that can sometimes lead to death (â€Å"Disney Pop Star†). Even today, dolls like Barbie send that message to young girl to be thin. The Barbie doll is a stereotype of a woman with no flaws and a perfect body who gets to be whatever she wants. Girls who play with Barbie feel the need to look and act like her. The traditional Barbie is known for her 40-18-32 measurements (Young) which would be unproportional on human bodies (Grey). If Barbie were real, she would be 5’9†³ tall and weigh 110 pounds, about 35 pounds below the minimum healthy weight for a woman of that size (McMurray). Barbie helps to perpetuate an ideal of materialism, beauty, and being thin is happiness and since a young age, the desire to be thin is recognized by girls everywhere. But eating disorders doesn’t just affect women, it affects men also. In a study by Harvard researchers, 25% of 3,000 adults had anorexia or bulimia and 40% of binge eaters were men (Boodman). Just like women, men also feel pressured into looking a certain way. In school, boys are told to be healthy if they want to keep playing a sport. But that habit can become something more dangerous. â€Å"Studies show that gay males particularly place a higher calculation on thinness than heterosexual males, with a level of concern for thinness almost equal to that of the typical heterosexual female† (Anderson, Cohn, and Holbrook 41). Because of this many men might be afraid about coming out to the world about their eating disorder. Some people think of an eating disorder as more of a woman thing and â€Å"psychological tests for eating disorders are biased towards diagnosing women† (Anderson, Cohn, and Holbrook 41). Eating disorders are also common in the entertainment business. Celebrities and models are also under pressure to look their best. The average model weighs 23% less than the average woman and fit the category of being anorexic (Thompson). Models go through plastic surgery and photos are air-brushed before going to print. The body type and images are unobtainable to the average individual and the constant force of these images on society makes teens believe that they should be. Many celebrities and models who feel that an eating disorder is something more dangerous than what everyone else seems have come out and talked about that issues. Even celebrities who once had an eating disorder spend time educating others and telling them that it is okay to get help. In 1992 after the news about Princess Diana being bulimic was released, there was a significant increase in the number of bulimia diagnoses. This effect then came known as the â€Å"Diana Effect† (Celebrities Who Battled Eating Disorders). Just like how Lucy Grealy states in her memoir Autobiography of a Face, â€Å"Beauty, as defined by society at large, seemed to be only about who was best at looking like everyone else† (187) it looks like that concept has not changed since that time. In today’s society everything is about being thin and trying to look like a model or a celebrity. Teenagers try to do everything to make themselves how society wants it but in the end they just destroy themselves. Society and media think of an eating disorder as a joke but it is a disease; a disease that has the power to take the lives of both women and men. For anybody out there who thinks that an eating disorder is not a big deal then they are wrong. People, especially the media, should know that the message they send out to teens is wrong; everything is not just about being thin. Simply by the media bringing out the concept that being beautiful and thin is necessary for a successful life is wrong. Having to look like a model to be accepted in society is wrong. All these messages have a huge negative effect on teenagers and they think down of themselves just because they do not think they are â€Å"right† for society. The fake advertisements that are shown is just another step for teens to developing a dangerous and deadly addiction that is called an eating disorder. â€Å"I think we look at society and we look at every ad that out there and everything that tells us how we’re supposed to look, and how we’re supposed to live, and how we’re supposed to be instead of saying ‘Is that how really I feel? ’, ‘Is that really what I want to do? ’, and ‘Is that really how I want to live? ’† (Ellen DeGeneres).